Jan 24, 2010 by Korg o1w fd | Posted in Maintenance & Repairs
00 crpwn vic
i have the puller tool. When i tighten up on the tool with ym ratchet it become tight. but the pitman arm is still stuck on the gear box shaft....SHould i stop when it gets tight to use the ratchet or should i keep trying to turn it to get the pitman off..
Should i use a breaker bar socket wrench to get more leverage when i turn the pitman puller? I dont want to break the puller
woudl i do damage?
Can i turn it as hard as I want until the arm comes off?
thanks
andddddddddd wheni put the new one on...how do i get it on ..do i bang it on?
thaks
Remove the bolt and nut from the pitman arm.
Find a flat chisel or old flat screwdriver and drive it in between the the two halves enough to spread the shoulder apart a little bit so it will slide off easier.
Did you COMPLETELY remove the bolt?
It will NOT slide off if the bolt is still in there.
Mr. KnowItAll | Jan 24, 2010
You will have to use a breaker bar and socket to get the arm to
break lose. It will pop lose with a great deal of pressure. The
new one will go almost all the way up on the shaft so you can
tighten the big nut good and tight.
Pat | Jan 24, 2010
im replacing the pitman arm on my truck and advanced auto parts has one for 16 bucks should i get it?
May 20, 2011 by chris | Posted in Maintenance & Repairs
its a 1997 chevy silverado z71/k1500 with about 180k on the clock
you know id rather save some money if i can because otherwise its 40 bucks and the puller im getting is about 70(i dont feel like removing the gearbox or taking a chance on the tool breaking)
heres the part
http://shop.advanceautoparts.com/webapp/ wcs/stores/servlet/product_Steering-Pitm an-Arm-Driveworks_15530119-P_69_R|GRPCHA SAMS_1688013090____
i need some answers asap
yeah i was gunna get this or TRW which is 40 bucks
i got TRW idler arm and bracket and some other stuff and am running outta money lol
the two names in aftermarket parts that are high quality are
TRW
or
Moog
if they are selling you either one of those name brands your ok...but stay away from their private brand they sell under their name///
| May 20, 2011
Replacing a pitman arm on a 1997 Ford F150
Replacing the pitman arm on a 1997 Ford F150. If you are going to do this job I would suggest getting a quality puller and a good pickle fork.
스카니아 피트암 붓싱 탈거 - Pitman Arm Puller for Scania(Demount)
