Pitman Arm on ford f150 - Pitman Arms


1992 ford f150 steering column?

Mar 13, 2009 by Ryan P | Posted in Ford

I have a 1992 ford f150 2wd 300ci regular cab long bed. How to completly remove a steering column out of the truck and what tools do i need. I would have to leave the gear box on and maybe the pitman arm a pinch bolt broke in the steering coupler and i dont have enough clearence to drill out.
Would there be enough clearence to take all that out together
the steering column is fine. The steering coupling connects the gear box shaft to the column and the pinch bolt broke inside i dont have a good angle to drill it out so i was wondering if you could remove the gear box with the column so i could drill the bolt out on my work bench and not ruin the shaft the gear box is brand new so i dont want to cut anything

Go to a salvage yard and buy a complete column, make sure it;s compatible with the one you have, a few basis tools to bolt back in and a few connectors to plug in, should have plenty clearance to take out and install. This is really the easiest way and not so hard to do I just replaced a column in a similar one in a 1993 Ford Bronco.

Wilkerson B | Mar 13, 2009

Can't help you here. I would have to see exactly what your problem is. You are probably overcomplicateing the thing though.
The Hearse Driver | Mar 13, 2009

Go to a salvage yard and buy a complete column, make sure it;s compatible with the one you have, a few basis tools to bolt back in and a few connectors to plug in, should have plenty clearance to take out and install. This is really the easiest way and not so hard to do I just replaced a column in a similar one in a 1993 Ford Bronco.
Wilkerson B | Mar 13, 2009



Replacing a pitman arm on a 1997 Ford F150

Replacing the pitman arm on a 1997 Ford F150. If you are going to do this job I would suggest getting a quality puller and a good pickle fork.

How To Replace A Pitman Arm

www.autohowtovideos.com More work being done on project chevy. Today is part 1 of several front suspension repairs we're going to tackle on ...